HomeBlog / Articles

How to break in a new motorcycle: A guide for UAE riders

How to break in a new motorcycle: A guide for UAE riders

Plan the first rides around your motorcycle’s running-in instructions and first service, with practical Sharmax examples and a clear record of what to check.

17 Nov 2026

How to break in a new motorcycle: A guide for UAE riders

Start with the riding instructions and the service date

Breaking in, or running in, is a new motorcycle’s first period of use under the manufacturer’s riding instructions. Before setting off, find the riding limits and first-service requirements in the handbook supplied with your bike.

A first-service appointment can fall before the running-in period ends. Keep the two separate: completing the service does not automatically remove the remaining riding limits.

What to findWhat it tells youWhat to record
Running-in instructionsHow the manufacturer permits the motorcycle to be used initiallyEach stage, its limits and when it ends
First-service scheduleWhen the motorcycle needs its initial scheduled workshop visitThe due condition and the specified work

Match the handbook to your bike’s exact version; similar names and engine capacities can have different requirements.

Turn the handbook into a plan

A short written plan makes the handbook usable during the first weeks of ownership. Fill in these four parts before setting off.

  1. Match the bike and its documents

    Check the model, version and identifying details against the supplied handbook and service booklet. If the document covers several motorcycles, locate the section for yours. Have the seller clarify a mismatch before using its figures.

  2. Write down the initial riding limits

    Note any stated limits for engine speed, throttle, speed, load and passengers, including changes between stages. Keep the original units beside each entry so a distance, operating-hours limit or calendar date is not confused with another measure.

  3. Set the first-service reminder

    Record the initial-service requirement exactly as supplied. Where the schedule combines conditions, use its stated rule for which condition makes the service due. Confirm the appointment before a planned trip would take you past it.

  4. Keep a simple use record

    Log the date and odometer reading, and operating hours if your motorcycle records them and the schedule uses them. Add the service booking and completed work. You can then check the next outing against the relevant stage without relying on memory.

Choose early rides you can complete within the limits

Choose a first route that lets you stay within the stated riding and load limits. If your usual journey makes that difficult, plan a different outing.

Where the manufacturer calls for changes in engine load or speed, choose a journey that allows them. Follow its method, including starting and warm-up guidance; “vary the speed” does not mean hard acceleration.

For a longer trip, work out where a service due while you are away can be completed. Check the motorcycle’s eligibility for the intended roads. For an off-road outing, arrange a suitable location and transport.

Learn where the controls are before the ride and clarify anything unfamiliar.

GL 250 Dubai: plan the first road journeys

The UAE card for the Sharmax GL 250 Dubai lists a 760 mm seat height and 147 kg curb weight. These are useful starting points when checking your reach to the controls and how you manage the motorcycle at a showroom.

Pictured: Sharmax GL 250 Dubai.

GL 250 Dubai image 01
GL 250 Dubai image 02
GL 250 Dubai image 03

Curb weight (kg)

147

Ground clearance (mm)

170

Seat height (mm)

760

Power Max 320: prepare for the off-road setting

The UAE Power Max 320 card lists an 890 mm seat height and 300 mm ground clearance. Its listed seat is 130 mm higher than the GL 250 Dubai’s, so someone who has checked the touring bike should assess the enduro’s fit separately.

Pictured: Sharmax Power Max 320.

Power Max 320 image 01
Power Max 320 image 02
Power Max 320 image 03

Curb weight (kg)

120

Ground clearance (mm)

300

Seat height (mm)

890

Check the whole motorcycle before the ride

Running-in instructions sit alongside the normal pre-ride inspection. The Motorcycle Safety Foundation’s T-CLOCS checklist groups checks into tyres and wheels, controls, lights and electrics, oil and other fluids, chassis, and stands.

Use those categories to look for damage, leaks, or controls and lights that are not working as expected. Follow the bike’s own checking methods and values.

Have a warning light, unusual noise, leak, or change in braking or handling assessed before using the bike again, even if the first service is not yet due.

Include the instructions for new tyres and brakes in your preparation.

Arrange the first service before it interrupts a trip

Contact the Sharmax service centre with the model, identifying details, purchase date and current mileage, plus operating hours where relevant. Ask the team to confirm the first-service requirement and the work for that visit.

Keep the completed job record with the service booklet.

For UAE use, describe the conditions you expect: a daily road journey, dusty off-road outings or a longer trip. Ask which provisions in the applicable schedule cover those conditions, and include them in your plan.

Frequently asked questions

17 Nov 2026

Did you like the article?